Profile setup buttons
Located at the "top edge" of the scale are three buttons used for profile set up. The wording, and imprinted arrows on the glass platform are not touch sensitive buttons.
Changing the scale from KG to LB
Located at the bottom of the scale, is a button labeled "kg/st/lb" near the top left corner foot. Press the button to change the unit of measurement.
User profile auto detection
The scale will automatically select your user profile to calculate your body composition by comparing your current body weight measurement to previous body weight measurements from each user profile. If your current body weight changes by more than 7 pounds from your previous measurement, or if your body weight is within 7 pounds of another user profile, then you will need to manually select your user profile and confirm your user profile data before the scale will calculate your current body composition.
Unfortunately, users are not able to delete/reset profiles manually. If users are attempting to get rid of a profile that is confusing the original profile, users will have to manually select the offending profile, and use the scale on a carpeted surface (which will weigh you less than your original weight). This method will register the "lighter weight" into the offending profile's memory bank so that it is no longer interfering with your original profile.
Required battery model:
Two CR2032 batteries
Valid for USHM180G Ultra Slim Health Monitor. Model #: USHM180G
0 Comments