Quick Start Guide (DHR1 / DHR2)

  1. Peel screen protector from the display.
  2. Remove plastic wrapping from the batteries.
  3. Insert batteries into the compartment and ensure they are seated properly. Close the battery compartment.
  4. Slide the on/off switch located on the back of the unit to the "on" position.
  5. Select whether you want to use the "cook" or "timer" option by sliding the switch in the direction of your desired mode.
  6. Switch to Fahrenheit or Celsius by lightly pressing and holding down the 'S/T' key until a beep occurs.
  7. Plug the probe into the display unit.
  8. Select the type of meat you are cooking by pressing the 'M/M' key.
  9. If available, select the doneness of the meat by pressing the 'S/T' key.
  10. To set an alert temperature, press and hold the 'S/S' key until alert temp is flashing.
  11. Set the alert temp by using 'M/M' key to raise the temp or 'S/T' key to decrease the temp. Press S/S key to confirm.
  12. To toggle the alert temp on or off, simply press the 'S/S' key. (The word "ALERT" located above the alert temp will appear if the alarm is enabled)
Was this article helpful?
0 out of 1 found this helpful
Have more questions? Submit a request


Please sign in to leave a comment.