Unit will not power on
If the unit is brand new, please check the batteries for any plastic wrapping, and remove. If you have had the unit for a good period of time, try replacing the battery. If the issue persists, please contact Escali about the product 2 year warranty.
How to switch from Celsius to Fahrenheit
Lightly press and hold the 'S/T' key until the thermometer beeps to confirm the mode change.
How to set the alert temp
- Press and hold the 'S/S' key until alert temp flashes.
- Use the 'M/M' and 'S/T' keys to increase or decrease alert temp setting.
- Press 'S/S' to confirm.
- Toggle the alert temp on or off by pressing the 'S/S' key.
- The word "ALERT" will appear above alert temp if the alarm is enabled.
- Press 'S/S' key again to disable alarm.
Locating the kick stand
The kick stand and battery cover are all one piece. Simply place the tip of your finger into the groove to pull the stand up. [see image link]
DR3_kickstand.JPG
Battery type
This unit uses two AAA batteries.
0 Comments