Quick Start Guide (US200L)

  1. Install the included AAA batteries into each side of the battery compartments according to the inner diagram indicating the positive, and negative positioning.

  2. Press the "UNIT" button located on the front side of the scale to change your read-out mode to: lb (pounds), kg (kilograms), or st lb (stone).

  3. Set the scale down on a flat hard surface (non-carpet).

  4. With one foot, apply pressure on top of the scale to power it on, and remove your foot once the LCD is lit up. Wait for the scale to power off to allow it to adjust to the new surface you have placed it on.

  5. Once the scale is powered off, step on to the scale to weigh yourself! The scale will automatically power on and weigh immediately.


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Article is closed for comments.